In order for the IT Asset Tool Client to correctly collect and forward the collected data to the Vs server, it must be executed with some parameters.

Example of error Launcing IT Asset Client

As you can see in the above screen in case they are not inserted IT Asset Tool will show you what boot parameters are required. The IT Asset Tool client requires some parameters to start sucessifuly.

Below the complete guide to client parameters.

 

Parameters Value Required Description
server IP Address Yes Set the server IP of IT Asset Tool Server
port 0-65536 Yes Set the port Listen of IT Asset Tool Server
senddelay 0-86400000 Yes Set the interval in milliseconds to send data to Server ***
debug True-False No Set Debug mode to show the log messages in the Client Console
admin User Admin No Set the name of User Admin for audit log. Default is Administrator
autouninstall True-False No Enable the Centralized Uninstallation of Software from IT Asset Tool Management. Default False

 

 

 

 

 

 

 

*** At the start-up of ClientIAT.exe, the first inventory software starts after 3 minutes in order not to slow down the start-up of the operating system.

 

Example:

"\\server-it-asset-tool\client\ClientIAT.exe "  server=192.168.0.100 port=18888 senddelay=3600000 admin=Brian

This row launches the client from network shared folder and then the client sends the data that it collects to port 18888 of server 192.168.0.100 every hour. In addition will be logged every login by Brian.

 Client IAT in debug mode 

 Once the initial three minutes have elapsed, the client will begin to analyze the Computer and then display a report of the data collected and sent to the IT Asset Tool Server.

 

As best practice, we suggest to share the client application (requested procedure during the installation) and execute it with a windows group policy. 

IT Asset Tool Client and Server need an exception of firewall port to comunicate between each other. By default the Server listens to the Tcp Port 18888 but can be customized.

 

Go to top